Just remember, all Foxwoods chips now have RFID and can track their chips.
Do you have a source for this? There's various banter about it, but I haven't been able to find any definitive confirmation of this. I'd be surprised if they did so with anything except the highest value chips.
They still don't have readers on the tables, or in the cage.
http://www.wtnh.com/dpp/news/news_wtnh_mashantucket_foxwoods_set_to_retire_chips_casino_200901231737_rev1 (Archive copy)
(Dead link: http://www.wcbs880.com/Foxwoods-Casino-Chips-Go-High-Tech/3720904)
There's more sources; just google it!
They "selected" chips, and "plans" to introduce them. This is a puff-PR piece for the chip supplier. I was looking for definitive information.
I did Google them prior to responding, and it looks like a lot of articles that are very thin on information, and are mostly loose PR spots. Are all the chips RFID enabled? Or just high value? Are the table readers installed? Used?
I wonder if a simple RF broadcast to inhibit the signal would be considered a "cheating device".![]()
I dunno if trying that would be a good idea these days. Something tells me that if the casino read your EZpass, they'd probably deduct it from your EZpass account. These are hard times for casinos you know. :laugh::laugh:Just bring your EZpass in with you. Confuse the hell out of the reader![]()
I was there not too long ago and there was no evidence of any RFID readers or chips.
MGM @ FW put new felt on all their tables in Dec., and changed the colors to, from thier royal blue to dark burgandy. The felt did seem to have been heavily worn around the dealers box, but changing the felt on all the tables must have cost a chunk of change. Considering their only open about 7 months, maybe there's something more then new felt on them tables?
BJC
The RFID systems I've seen have a button on top of the table that the dealer presses at the start of each hand. I suppose it's possible to do it some other way, but it wouldn't make sense to buy new felt and punch holes in it for the button. A RFID table requires major work on the table, not just the felt.
But it's possible they could want RFID chips and not use them to track the players. An RFID unit right under the dealer's tray would be more useful from the point of view of everyday operations because it could track the hold at each table and also account for chips coming in and out of the cage. That would be a sensible way to use it.
couldn't it be possible to have the pickups sealed into the padding (which would be nearly undetectable) under the felt or a cavity hollowed out under the betting box where the pickup would be installed?
The tray is also problematic because reading a large number of tags in close proximity is very difficult technically. Also, aren't the trays metal at FW?
My guess is that for the moment the tags are only being used as an anti-counterfitting measure. (I can't imagine casino chips are that hard to fake)